View RP40-4833SGWN_1302560.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Features
Regulated Converters

4:1 Wide Input Voltage Range 40 Watts Regulated Output Power 1.6kVDC Isolation Over Current and Over Voltage Protection Six-Sided Shield No Derating to 55C Standard 2" x2" Package and Pinning Efficiency to 86%
POWERLINE
DC/DC-Converter
RP40S_DGW Series
40 Watt 2" x 2" Single & Dual Output
Selection Guide 24V and 48V Wide Input Types
Part Number Input Range VDC 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 9-36 9-36 18-75 18-75 Output Voltage VDC 3.3 5 12 15 3.3 5 12 15 12 15 12 15 Output Current mA 10000 8000 3333 2666 10000 8000 3333 2666 1667 1333 1667 1333 Input (4,5) Current mA 80/1677 100/1984 100/1984 110/1984 50/838 50/992 70/992 70/992 30/1984 30/1984 20/992 20/992 Efficiency(6) Capacitive(7) Load max. % F 86 88 88 88 86 88 88 88 88 88 88 88 25750 13600 2360 1510 25750 13600 2360 1510 1200 750 1200 750
RP40-243.3SGW RP40-2405SGW RP40-2412SGW RP40-2415SGW RP40-483.3SGW RP40-4805SGW RP40-4812SGW RP40-4815SGW RP40-2412DGW RP40-2415DGW RP40-4812DGW RP40-4815DGW
* no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard * add /N for CTRL function with Negative Logic (0=ON, 1=OFF)
Derating Graph (Ambient Temperature)
RP40-4805SGW
125 100 75 Output Power (%) 50 25 1=75Vin, 2=18Vin, 3=48Vin 1 23
Nom Vin
Natural Convection
0 -40 -25 -10 0 40 50 60 70 80 90 100 110 55 Ambient Temperature Range (C)
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at
280 November-2006 www.recom-international.com
POWERLINE
DC/DC-Converter
Derating Graph (Ambient Temperature)
RP40-S_DGW Series
RP40-4805SGW
1=Natural Convection, 2=200LFM, 3=300LFM, 4=400LFM, 5=500LFM 1 2 3 45
125 100 75 Output Power (%) 50 25
Natural Convection
0 -40 -25 -10 0 40 50 60 70 80 90 100 110 55 Ambient Temperature Range (C)
Specifications (typical at nominal input and 25C unless otherwise noted)
Input Voltage Range Undervoltage Protection Input Filter Input Voltage Variation dv/dt Input Surge Voltage (100 ms max.) (Complies with ETS300 132 part 4.4) 24V Input 48V Input Input Reflected Ripple (nominal Vin and full load)(see Note 3) Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see Note 7) (Positiv logic) (Negativ logic) Remote OFF input current Output Power Output Voltage Accuracy (full Load and nominal Vin) DC-DC ON DC-DC OFF DC-DC ON DC-DC OFF Nominal input 24V nominal input 48V nominal input 24V Input 48V Input 9-36VDC 18-75VDC DC-DC ON = 9VDC, DC-DC OFF = 8VDC DC-DC ON = 18VDC, DC-DC OFF = 16VDC Pi Type 5V/ms max 50VDC 100VDC 20mAp-p 20ms typ. Open or 3V < Vr < 12V Short or 0V < Vr < 1.2V Short or 0V < Vr < 1.2V Open or 3V < Vr < 12V 24Vin: 10mA 48Vin: 5mA 40W max. 1% continued on next page
www.recom-international.com
November-2006
281
POWERLINE
DC/DC-Converter
Specifications, cont. (typical at nominal input and 25C unless otherwise noted)
Voltage Adjustability (see Note 1) Load Regulation (0% to 100% full load) (see Notes 9, 10) Line Regulation (low line, high line at full load) Cross Regulation (see Note 11) Temperature Coefficient Ripple and Noise (20MHz bandwith) Single Dual Dual
RP40-S_DGW Series
10% 0.5% 1% 0.2% 5% 0.02%/C max. 50mVp-p 75mVp-p 120mVp-p 150mVp-p 250s 3.3 Vout 5 Vout 12 Vout / 12 Vout 15 Vout / 15 Vout 3.9V 6.2V 15V / 15V 18V / 18V 150% max. Hiccup, automatic recovery see Selection Guide" table 1600VDC min. 1 G min. 1500pF max. 300kHz typ. -40C to +55C(without derating) +55C to +105C(with derating) 105C -55C to +125C 115C typ. 9.2C/Watt 7.6C/Watt MIL-STD-810D 10-55Hz, 10G, 30 Min. along X, Y and Z 5% to 95% RH Nickel plated copper Non-conductive black plastic FR4 Epoxy (UL94-V0) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Class A Class A Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A 60g 51.3 x 51.3 x 10.2mm Bellcore TR-NWT-00332 MIL-STD-217F 1105 x 103 hours 151 x 103 hours www.recom-international.com
Single 3.3, 5V Single 12, 15V Dual 12V Dual 15V
Transient Response (25% load step change) Over Voltage Protection Zener diode clamp (only single)
Over Load Protection (% of full load at nominal Vin) Short Circuit Protection Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Operating Frequency Operating Temperature Range Maximum Case Temperature Storage Temperature Range Over Temperature Protection Thermal Impedance (see Note 8) Thermal Shock Vibration Relative Humidity Case Material Base Material Potting Material Conducted Emissions (see Notes 12, 14) Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity Weight Dimensions MTBF (see Note 2)
Without Heat-Sink With Heat-Sink
282
November-2006
POWERLINE
DC/DC-Converter
Notes :
RP40-S_DGW Series
1. For the single output: Maximum output deviation is 10% inclusive of remote sense and trim. If remote sense is not being used, the +sense should be connected to its corresponding +OUTPUT and likewise the -sense should be connected to its corresponding -OUTPUT. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). 3. Simulated source impedance of 12H. 12H inductor in series with +Vin. 4. Maximum value at nominal input voltage and full load. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistive load. 7. The ON/OFF control function. There are positive logic (standard) and negative logic (option). The pin voltage is referenced to negative input To order negative logic ON/OFF control add the suffix-N (Ex: RP40-4805SGW-N). 8. Heat sink is optional and P/N: 7G-0026A. 9. The dual output required a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 10. Load regulation for dual output : Min load to 100% load balanced on all outputs. 11.Cross regulation for dual output : asymmetrical load 25% / 100% FL. 12..The RP40-GW series required external filter to meets EN55022 class A. 13.Output ripple and noise measured with a 0.1F/50V MLCC. 14.See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle projection 51.30 10.20 dia. 1.0 51.30
0.70 5.6
Pin Connections
45.70
4
5.10 15.30 28.20
1 2
2.5 5.10 7.6 15.20 20.30
Pin # 1 2 3 4 5 6 7 8
Single +Vin -Vin CTRL -SENSE (Note 1) +SENSE (Note 2) +Vout -Vout TRIM
Dual +Vin -Vin CTRL +Vout Com Com -Vout TRIM
Pin Pitch Tolerance 0.35 mm
Bottom View
5 6 7 8
3
External Output Trimming
Output can be externally trimmed by using the method shown below. ( ) for dual output trim
7(7) Trim Up RU 8(8) 6(4) 8(8) Trim Down RD
www.recom-international.com
November-2006
283

▲Up To Search▲

Price & Availability of RP40-4833SGWN

	To Download RP40-4833SGWN Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .